Chevrolet Traverse 2015 Owner'S Manual Download Page 11

Page: 11 / 435

Black plate (4,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

1-4

In Brief

21.

Rear Window Wiper/Washer on
page 5-5

Traction Control System (TCS)
Disable Button. See

Traction

Control/Electronic Stability
Control on page 9-28

Forward Collision Alert (FCA)
System on page 9-32

(If

Equipped).

Lane Departure Warning
(LDW) on page 9-41

(If

Equipped).

Tow/Haul Button (If Equipped).
See

Tow/Haul Mode on

page 9-25

Power Liftgate Button (If
Equipped). See

Liftgate on

page 2-8

22.

Heated and Cooled Front
Seats on page 3-8

(If

Equipped).

23.

Hazard Warning Flashers on
page 6-3

24.

Passenger Sensing System on
page 3-30

Initial Drive
Information

This section provides a brief
overview about some of the
important features that may or may
not be on your specific vehicle.

For more detailed information, refer
to each of the features which can be
found later in this owner manual.

Remote Keyless Entry
(RKE) System

The RKE transmitter is used to
remotely lock and unlock the doors
from up to 60 m (195 ft) away from
the vehicle.

Press

to unlock the driver door.

Press

again within five seconds

to unlock all remaining doors.

Press

to lock all doors.

Lock and unlock feedback can be
personalized.

To open or close the liftgate, press
and hold

until the liftgate

begins to move.

Press

and release to locate the

vehicle.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands

Chevrolet Traverse 2015, Owner'S Manual

Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands