manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (16,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

10-16

Vehicle Care

5. Fill the coolant recovery tank to

the FULL COLD mark or to the
FULL COLD ISO symbol mark.

6. Reinstall the cap on the coolant

recovery tank but leave the
radiator pressure cap off.

7. Start the engine and let it run

until the upper radiator hose
feels warm. Any time during this
procedure, watch out for the
engine cooling fans.

8. If the coolant level inside the

radiator filler neck is low, add
more of the proper DEX-COOL
coolant mixture through the filler
neck until the level is back up to
the base of the filler neck.

9. Replace the pressure cap tightly.

At any time during this
procedure if coolant begins to
flow out of the filler neck,
reinstall the pressure cap.

{

Caution

If the pressure cap is not tightly
installed, coolant loss and
possible engine damage may
occur. Be sure the cap is properly
and tightly secured.

Engine Overheating

The vehicle has several indicators
to warn of engine overheating.

There is an engine coolant
temperature gauge on the
instrument panel cluster. See

Engine Coolant Temperature Gauge
on page 5-14

.

The vehicle may also display an
ENGINE OVERHEATED IDLE
ENGINE and ENGINE
OVERHEATED STOP ENGINE
message in the Driver Information
Center (DIC). See

Engine Cooling

System Messages on page 5-36

.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
Whispbar K482W Fitting Instructions Manual preview
K482W
Brand: Whispbar Pages: 14
Lund Tonno Pro Installation Instructions Manual preview
Tonno Pro
Brand: Lund Pages: 12
Tesla Gen 3 Manual preview
Gen 3
Brand: Tesla Pages: 42
Opel MERIVA 2014 Brochure & Specs preview
MERIVA 2014
Brand: Opel Pages: 44
Setma E12AU02002 Instruction Manual preview
E12AU02002
Brand: Setma Pages: 16
GEMINI TECHNOLOGY 514F User Manual preview
514F
Brand: GEMINI TECHNOLOGY Pages: 9
Classic Accessories 80-485-142401-RT Instructions Manual preview
80-485-142401-RT
Brand: Classic Accessories Pages: 14
Jeep 2018 GRAND CHEROKEE User Manual preview
2018 GRAND CHEROKEE
Brand: Jeep Pages: 372
Bracketron MULTI VEHICLE MOUNT MVM-45-05 Installation Manual preview
MULTI VEHICLE MOUNT MVM-45-05
Brand: Bracketron Pages: 4

Brands by name

Popular brands

Load more brands