Chevrolet Traverse 2015 Owner'S Manual Download Page 73 | Manualshive

Page: 73 / 435

background image

Black plate (18,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

3-18

Seats and Restraints

To move it down, push down on the
release button and move the height
adjuster to the desired position. You
can move the height adjuster up by
pushing up on the shoulder belt
guide.

After the adjuster is set to the
desired position, try to move it down
without pushing the release button
to make sure it has locked into
position.

Safety Belt Pretensioners

This vehicle has safety belt
pretensioners for the front outboard
occupants. Although the safety belt
pretensioners cannot be seen, they
are part of the safety belt assembly.
They can help tighten the safety
belts during the early stages of a
moderate to severe frontal, near
frontal, or rear crash if the threshold
conditions for pretensioner
activation are met. Safety belt
pretensioners can also help tighten
the safety belts in a side crash or a
rollover event.

Pretensioners work only once. If the
pretensioners activate in a crash,
they will need to be replaced, and
probably other new parts for the
vehicle's safety belt system. See

Replacing Safety Belt System Parts
after a Crash on page 3-22

.

Rear Safety Belt Comfort
Guides

Rear safety belt comfort guides may
provide added safety belt comfort
for older children who have
outgrown booster seats and for
some adults. When installed on a
shoulder belt and properly adjusted,
the comfort guide positions the
shoulder belt away from the neck
and head.

Second Row Seats

There are comfort guides for the
rear outboard seating positions in
the second row stored on a clip on
the interior trim next to the outboard
seatback.

«
...
71
72
73
74
75
...
»

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

Brand: FABBRI PORTATUTTO Pages: 2

Brand: FORM FIT Pages: 2

Automotive 31006

Brand: KRAFTWERK Pages: 2

Brand: Mini Pages: 20

Brand: Right Weigh Pages: 16

Brand: Icom Pages: 20

Brand: Hyundai Pages: 19

Brand: Lantronix Pages: 51

Brand: Prorack Pages: 15

A-18 TRAILER ABS

Brand: BENDIX Pages: 40

Brand: Toyota Pages: 56

Brand: Subaru Pages: 399

Brand: Buick Pages: 112

Brand: Wallbox Pages: 21

Brand: Vauxhall Pages: 310

Brand: Whispbar Pages: 17

Brand: Thule Pages: 8

Brand: Prorack Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands