Chevrolet Traverse 2015 Owner'S Manual Download Page 235

Page: 235 / 435

Black plate (10,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

8-10

Climate Controls

Rear Climate Control System (with Rear Seat Audio)

1. Fan Control

2. Air Delivery Mode Control

3. Temperature Control

If equipped with the rear climate
control system, the controls are on
the rear of the center console.

Press the REAR button on the front
climate control system to control the
rear climate control system. The
system also turns on if any of the

rear controls, except

, are

pressed. The display is activated
when the rear system is on.

The system can also be turned off
by pressing

until the fan goes off.

Sync Mode:

This mode matches

the rear climate control to the front
climate control settings. It comes on
when REAR is pressed.

Independent Mode:

This mode

directs rear seating airflow
according to the settings of the rear
controls. It comes on when any rear
control is adjusted.

and

(Fan Control):

Press the

fan up or down buttons to increase
or decrease the fan speed.

Temperature Control:

Press +

−

to increase or decrease

the air temperature. The
temperature settings will display in
0-12 increments, going from the
coolest (0) to the warmest (12)
setting.

(Air Delivery Mode Control):

Press to manually change the
direction of the airflow. Repeatedly
press the button until the desired
mode appears on the display.

(Vent):

Air is directed through

the overhead outlets.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands

Chevrolet Traverse 2015, Owner'S Manual

Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands