manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (20,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

3-20

Seats and Restraints

Warning (Continued)

and across the chest. These parts
of the body are best able to take
belt restraining forces.

4. Buckle, position, and release the

safety belt as described
previously in this section. Make
sure the shoulder portion of the
belt is on the shoulder and not
falling off of it. The belt should
be close to, but not contacting,
the neck.

To remove and store the comfort
guide, squeeze the belt edges
together so that the safety belt can
be removed from the guide. Slide
the guide onto its storage clip.

Third Row Seats

{

Warning

A safety belt that is not properly
worn may not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. The shoulder
belt should go over the shoulder
and across the chest. These parts
of the body are best able to take
belt restraining forces.

Comfort guides for the third row
seating positions are available from
your dealer. Instructions are
included with the guide.

An adjustable comfort guide is used
for the center seating position in the
third row seat. The adjustable
comfort guide attaches to a loop on
the upper part of the seatback,
behind the left outboard headrest.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

Daihatsu Mira Manual preview
Mira
Brand: Daihatsu Pages: 340
TATA Motors Nano Owner'S Manual & Service Book preview
Nano
Brand: TATA Motors Pages: 94
GÄN GA Manual preview
GA
Brand: GÄN Pages: 24
Harmar Mobility AL001 Installation And Owner'S Manual preview
AL001
Brand: Harmar Mobility Pages: 10
Uebler F42 Mounting And Operating Instructions preview
F42
Brand: Uebler Pages: 18
Jeep Cherokee 16 1982 Technical & Service Manual preview
Cherokee 16 1982
Brand: Jeep Pages: 1311
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Safe Fleet PRIME DESIGN VRR3-FT21G-ST Manual preview
PRIME DESIGN VRR3-FT21G-ST
Brand: Safe Fleet Pages: 12
RAM 2013 2500 Big Horn Information preview
2013 2500 Big Horn
Brand: RAM Pages: 12
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
Toyota SEQUOIA 2010 Quick Reference Manual preview
SEQUOIA 2010
Brand: Toyota Pages: 36
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
Edelbrock Turbocharger 15012 Installation Instructions preview
Turbocharger 15012
Brand: Edelbrock Pages: 1
GMC Yukon XL Denali 2015 Owner'S Manual preview
Yukon XL Denali 2015
Brand: GMC Pages: 439

Brands by name

Popular brands

Load more brands