manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (36,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

9-36

Driving and Operating

.

A trailer was attached to the
vehicle, or an object was
hanging out of the liftgate during
the last drive cycle. Once the
object is removed, RPA will
return to normal operation.

.

A tow bar is attached to the
vehicle.

.

The bumper is damaged. Take
the vehicle to your dealer to
repair the system.

.

Other conditions, such as
vibrations from a jackhammer or
the compression of air brakes on
a very large truck, are affecting
system performance.

Side Blind Zone
Alert (SBZA)

If equipped, the Side Blind Zone
Alert system is a lane-changing aid
that assists drivers with avoiding
crashes that occur with vehicles in
the side blind zone (or spot) areas.

The SBZA warning display will light
up in the corresponding outside side
mirror and will flash if the turn signal
is on.

{

Warning

SBZA does not alert the driver to
vehicles rapidly approaching
outside of the side blind zones,
pedestrians, bicyclists,
or animals. It may not provide
alerts when changing lanes under
all driving conditions. Failure to
use proper care when changing
lanes may result in injury, death,
or vehicle damage. Before
making a lane change, always
check mirrors, glance over your
shoulder, and use the turn
signals.

SBZA Detection Zones

The SBZA sensor covers a zone of
approximately one lane over from
both sides of the vehicle, or 3.5 m
(11 ft). The height of the zone is
approximately between 0.5 m (1.5 ft)
and 2 m (6 ft) off the ground. This
zone starts at approximately the
middle of the vehicle and goes back
5 m (16 ft).

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
TATA Motors 2013 Nano Owner'S Manual preview
2013 Nano
Brand: TATA Motors Pages: 136
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
Sagem MyCK100 User Manual preview
MyCK100
Brand: Sagem Pages: 10
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Mitsubishi 3000gt 1999 Workshop Manual preview
3000gt 1999
Brand: Mitsubishi Pages: 57
Laser PW-BT50AR Quick Start Manual preview
PW-BT50AR
Brand: Laser Pages: 3
Raider ATV-21 Manual preview
ATV-21
Brand: Raider Pages: 2
Haltech TMS-4 Quick Start Manual preview
TMS-4
Brand: Haltech Pages: 12

Brands by name

Popular brands

Load more brands