Chevrolet Traverse 2015 Owner'S Manual Download Page 382

Page: 382 / 435

Black plate (7,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

Service and Maintenance

11-7

Maintenance Schedule
Additional Required
Services - Severe

000

km/7,500

000

km/15,000

000

km/22,500

000

km/30,000

000

km/37,500

000

km/45,000

000

km/52,500

000

km/60,000

108

000

km/67,500

120

000

km/75,000

132

000

km/82,500

144

000

km/90,000

156

000

km/97,500

168

000

km/105,000

180

000

km/1

12,500

192

000

km/120,000

204

000

km/127,500

216

000

km/135,000

228

000

km/142,500

240

000

km/150,000

Rotate tires and perform Required Services.
Check engine oil level and oil life percentage.
Change engine oil and filter, if needed.

Replace passenger compartment air filter. (1)

Inspect evaporative control system. (2)

Replace engine air cleaner filter. (3)

Change automatic transmission fluid.

Change transfer case fluid, if equipped with
AWD. (4)

Replace spark plugs. Inspect spark plug wires.

Drain and fill engine cooling system. (5)

Visually inspect accessory drive belts. (6)

Replace brake fluid. (7)

Footnotes

—

Maintenance

Schedule Additional Required
Services - Severe

(1)

Or every two years, whichever

comes first. More frequent
replacement may be needed if the

vehicle is driven in areas with heavy
traffic, areas with poor air quality,
or areas with high dust levels.
Replacement may also be needed if
there is a reduction in air flow,
excessive window fogging, or odors.

(2)

Check all fuel and vapor lines

and hoses for proper hook-up,
routing, and condition.

(3)

Or every four years, whichever

comes first.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands

Chevrolet Traverse 2015, Owner'S Manual

Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands