manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (29,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

Driving and Operating

9-29

The indicator light for both systems
is in the instrument cluster. This
light will:

.

Flash when TCS is limiting
wheel spin.

.

Flash when StabiliTrak is
activated.

.

Turn on and stay on when either
system is not working.

If either system fails to turn on or to
activate, a message displays in the
Driver Information Center (DIC), and

d

comes on and stays on to

indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.

If

d

comes on and stays on:

1. Stop the vehicle.

2. Turn the engine off and wait

15 seconds.

3. Start the engine.

Drive the vehicle. If

d

comes on

and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.

Turning the Systems Off
and On

The button for TCS and StabiliTrak
is on the center stack.

{

Caution

Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.

To turn off TCS and StabiliTrak,
press and release the

4

button. The

appropriate message displays in the
DIC. To turn TCS and StabiliTrak on
again, press and release the

4

button. The appropriate message
displays in the DIC. See

Ride

Control System Messages on
page 5-41

.

If TCS is limiting wheel spin when
the

4

button is pressed, the system

will not turn off until the wheels stop
spinning.

Adding accessories can affect the
vehicle performance. See

Accessories and Modifications on
page 10-2

.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Scosche BTFREQ PRO BTFMPD3SR Manual preview
BTFREQ PRO BTFMPD3SR
Brand: Scosche Pages: 16
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Reimo TOUR EASY 4 936550 Quick Start Manual preview
TOUR EASY 4 936550
Brand: Reimo Pages: 4
Scosche VQ2M Manual preview
VQ2M
Brand: Scosche Pages: 32
Kargo Master 48132 Instruction Manual preview
48132
Brand: Kargo Master Pages: 9
Harbor Freight Tools 95058 Installation And Operation Instructions Manual preview
95058
Brand: Harbor Freight Tools Pages: 8
Fab Fours H3250 Installation Instructions Manual preview
H3250
Brand: Fab Fours Pages: 13
Prorack T84HALF Instruction Manual preview
T84HALF
Brand: Prorack Pages: 7
PNI Escort P05 A User Manual preview
Escort P05 A
Brand: PNI Pages: 12
Prorack K319 Fitting Instructions Manual preview
K319
Brand: Prorack Pages: 13
Westin 46-24025 Installation Instructions Manual preview
46-24025
Brand: Westin Pages: 9
VanEssa mobilcamping 00001668 Installation Manual preview
00001668
Brand: VanEssa mobilcamping Pages: 12
HUSKY LINERS 4707 Installation Manual preview
4707
Brand: HUSKY LINERS Pages: 3

Brands by name

Popular brands

Load more brands