manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (6,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

3-6

Seats and Restraints

To recline the seatback:

1. Lift the lever.

2. Move the seatback to the

desired position, and then
release the lever to lock the
seatback in place.

3. Push and pull on the seatback to

make sure it is locked.

To return the seatback to the upright
position:

1. Lift the lever fully without

applying pressure to the
seatback, and the seatback will
return to the upright position.

2. Push and pull on the seatback to

make sure it is locked.

Power Reclining Seatbacks

To adjust a power seatback,
if equipped:

.

Tilt the top of the control
rearward to recline.

.

Tilt the top of the control forward
to raise.

Memory Seats

If equipped, the controls on the
driver door are used to program and
recall memory settings for the driver
seat and outside mirrors.

Storing Memory Positions

To save into memory:

1. Adjust the driver seat, seatback

recliner, and both outside
mirrors.

Not all vehicles will have the
ability to save and recall the
mirror positions.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

PAC SWI-RC Installation Instructions preview
SWI-RC
Brand: PAC Pages: 4
PAC RP4-CH11 Manual preview
RP4-CH11
Brand: PAC Pages: 4
PAC BCI-CH41 User Manual preview
BCI-CH41
Brand: PAC Pages: 8
PAC C2R-CHY4 Installation Instructions preview
C2R-CHY4
Brand: PAC Pages: 5
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Ford TRANSIT CUSTOM Quick Reference Manual preview
TRANSIT CUSTOM
Brand: Ford Pages: 15
Honda 08L04-SZA-100 Installation Instructions preview
08L04-SZA-100
Brand: Honda Pages: 3
Soundoff Signal nERGY ETSA200R-PA Quick Start Manual preview
nERGY ETSA200R-PA
Brand: Soundoff Signal Pages: 3
Truma Mover H SE User Manual preview
Mover H SE
Brand: Truma Pages: 10
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23
Advent MAZBTSW2 Owner'S Manual preview
MAZBTSW2
Brand: Advent Pages: 8
Lexus 2014 GX 460 Quick Manual preview
2014 GX 460
Brand: Lexus Pages: 94
Baby Jogger CITY GO PD349056A Assembly Instructions Manual preview
CITY GO PD349056A
Brand: Baby Jogger Pages: 16

Brands by name

Popular brands

Load more brands