manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (13,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

Driving and Operating

9-13

The GVWR includes the weight
of the vehicle, all occupants,
fuel, and cargo.

The Certification/Tire label also
tells you the maximum weights
for the front and rear axles,
called the Gross Axle Weight
Rating (GAWR). To find out the
actual loads on your front and
rear axles, you need to go to a
weigh station and weigh your
vehicle. Your dealer can help
you with this. Be sure to spread
out your load equally on both
sides of the centerline.

Never exceed the GVWR for
your vehicle or the GAWR for
either the front or rear axle.

{

Warning

Do not load the vehicle any
heavier than the Gross
Vehicle Weight Rating
(GVWR), or either the
maximum front or rear Gross
Axle Weight Rating (GAWR).
This can cause systems to
break and change the way the
vehicle handles. This could
cause loss of control and a
crash. Overloading can also
shorten the life of the vehicle.

{

Caution

Overloading the vehicle may
cause damage. Repairs would not
be covered by the vehicle
warranty. Do not overload the
vehicle.

If you put things inside your
vehicle

—

like suitcases, tools,

packages, or anything else, they
will go as fast as the vehicle
goes. If you have to stop or turn
quickly, or if there is a crash,
they will keep going.

{

Warning

Things you put inside the
vehicle can strike and injure
people in a sudden stop or
turn, or in a crash.

.

Put things in the cargo
area of the vehicle. Try to
spread the weight evenly.

.

Never stack heavier
things, like suitcases,
inside the vehicle so that
some of them are above
the tops of the seats.

(Continued)

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual preview
v.LOGiC Intelligent Solution V5-NTG46
Brand: Caraudio-Systems Pages: 18
Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne... Installation Instructions preview
LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne...
Brand: Dakota Digital Pages: 3
Park-Daddy PD50AA Installation Manual preview
PD50AA
Brand: Park-Daddy Pages: 22
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
TEINHOF V-295 Fitting And Operation Manual preview
V-295
Brand: TEINHOF Pages: 2
NavLinkz RL4-ELINK Manual preview
RL4-ELINK
Brand: NavLinkz Pages: 23
Toyota 2012 Sienna Owner'S Manual preview
2012 Sienna
Brand: Toyota Pages: 779
Brodit ProClip 854676 Quick Start Manual preview
ProClip 854676
Brand: Brodit Pages: 2
Mitsubishi 2015 OUTLANDER Owner'S Manual preview
2015 OUTLANDER
Brand: Mitsubishi Pages: 490
UCANDAS VDM Instruction Of Quick Operation preview
VDM
Brand: UCANDAS Pages: 4
Westin 46-24025 Installation Instructions Manual preview
46-24025
Brand: Westin Pages: 9

Brands by name

Popular brands

Load more brands