manualshive.com logo in svg

Chevrolet Traverse 2015, Owner'S Manual

The Chevrolet Traverse 2015 is a versatile crossover SUV designed for families on the go. To unlock the full potential of this vehicle, make sure to download the free "Getting To Know Manual" from our website. This comprehensive manual will provide you with all the necessary information to navigate and enjoy your Chevrolet Traverse 2015 to the fullest.

Share
Download
background image

Black plate (3,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

Seats and Restraints

3-3

and push the head restraint
rearward until the desired locking
position is reached. Try to move the
head restraint after the button is
released to make sure that it is
locked in place.

The front seat outboard head
restraints are not removable.

Rear Seats

The vehicle's second row seats
have head restraints in the outboard
seating positions that cannot be
adjusted.

The vehicle's third row seats have
headrests in the outboard seating
positions that cannot be adjusted.

The second row head restraints and
third row headrests are not
removable.

Front Seats

Seat Adjustment

{

Warning

You can lose control of the
vehicle if you try to adjust a driver
seat while the vehicle is moving.
Adjust the driver seat only when
the vehicle is not moving.

1. Seat Adjustment Handle

2. Driver Seat Height

Adjustment Lever

3. Seatback Lever

To adjust a manual seat:

1. Lift the handle (1) under the seat

to unlock it.

2. Slide the seat to the desired

position, and then release the
handle (1).

3. Try to move the seat back and

forth to be sure it is locked in
place.

Move the lever (2) up or down to
raise or lower the seat.

Use the lever (3) to adjust the
seatback. See

Reclining Seatbacks

on page 3-5

.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Traverse 2015

Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
Brainz 38508 Instruction Manual preview
38508
Brand: Brainz Pages: 2
Reese 50085 Installation Instructions Manual preview
50085
Brand: Reese Pages: 21
Edelbrock 67312 Installation Instructions preview
67312
Brand: Edelbrock Pages: 2
Honda 2001 CR-V Owner'S Manual preview
2001 CR-V
Brand: Honda Pages: 326
ABB InCharge Terra AL2-40-240-T1-WC1R Installation Manual preview
InCharge Terra AL2-40-240-T1-WC1R
Brand: ABB Pages: 39
Chevrolet 2003 Monte Carlo Owner'S Manual preview
2003 Monte Carlo
Brand: Chevrolet Pages: 386
Chevrolet 2003 Impala Owner'S Manual preview
2003 Impala
Brand: Chevrolet Pages: 410
Chevrolet 2003 Blazer Owner'S Manual preview
2003 Blazer
Brand: Chevrolet Pages: 426
Chrysler 200 CONVERTIBLE 2011 Specifications preview
200 CONVERTIBLE 2011
Brand: Chrysler Pages: 5

Brands by name

Popular brands

Load more brands