Callout
Component Name
Preliminary Procedures
1. Remove the screws from the rear wheelhouse liners to the rear fascia. Refer to
Rear Wheelhouse Panel Liner
Replacement
.
2. Disconnect the rear electrical connectors.
1
Rear Fascia Screw (Qty:
2)
Caution:
Refer to
Fastener Caution
.
Tighten
10
N·m (89
lb
in)
2
Rear Fascia Lower Push-In Retainer (Qty:
2)
3
Rear Fascia
Procedure
1. Carefully push a small nylon wedge between the fascia and the rear fascia guide. Insert a small flat-bladed
tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually
remove the fascia from the rear fascia guide.
2. Transfer parts as needed.
Rear Bumper Fascia Replacement (Sedan)
© 2011 General Motors. All rights reserved.
Bumpers and Fascias
BODY REPAIR
0-3
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
