4. Position the center pillar outer panel (1) to the vehicle. Clamp the pillar in place.
5. Plug weld accordingly (1).
6. To create a solid weld with minimum heat distortion, make a 25 mm (1 in) stitch weld along the seam with gaps of 25 mm (1
in) gaps between them. Go back and complete the stitch weld (1).
7. Clean and prepare all of the welded surfaces
8. Apply the sealers and anti-corrosion materials to the repair area, as necessary.Refer to
Anti-Corrosion Treatment and Repair
.
9. Paint the repaired area. Refer to
Basecoat/Clearcoat Paint Systems
.
10. Install all related panels and components.
11. Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
12. Enable the SIR system. Refer to
SIR Disabling and Enabling
.
© 2011 General Motors. All rights reserved.
Collision Repair
BODY REPAIR
0-3
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
