12. Load the cylinder into the BO-49753 assembly tool so that the clutch
(1) indexes with the notch in the opening of the tool
(2).
13. Load the assembly tool with the lock cylinder into a vice and tighten the vice ONLY enough to hold the tool and lock the
cylinder in place.
14. Insert the roll pin
(7) into the driver
(6) and install it using a 1/16
inch pin punch.
15. Insert the buffer
(8) in the case
(9), verify the buffer is properly seated.
16. Install the free wheel pin
(11) in the sleeve
(4) and clutch
(5) and insert the assembly into the case
(9).
17. With the lock cylinder assembly installed in the case
(9), install the retainer
(10) and stake the retainer in place using a small
punch and hammer to peen the case material onto the exposed ends of the installed retainer
(10).
18. Insert the key into the lock and function the lock to check for proper assembly and smooth operation.
© 2011 General Motors. All rights reserved.
0-1
General
GENERAL INFORMATION
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
