Callout
Component Name
Preliminary Procedures
1. Remove the steering wheel. Refer to
Steering Wheel Replacement
.
2. Remove the steering column upper trim cover. Refer to
Steering Column Upper Trim Cover Replacement
.
3. Remove the steering column lower trim cover. Refer to
Steering Column Lower Trim Cover Replacement
.
1
Steering Wheel Inflatable Restraint Module Coil Bolt
(Qty:
4)
Caution:
Refer to
Fastener Caution
.
2
Steering Wheel Inflatable Restraint Module Coil
Procedure
1. Disconnect any electrical connectors as necessary.
2. Use tape in order to secure the old coil in the center position.
3. Remove the old coil from the steering column.
4. Transfer the steering angle sensor. Refer to
Steering Angle Sensor Replacement
.
5. Ensure the coil is centered during installation. If you are installing a NEW coil, ensure the centering tab is on
the coil. If the coil is not centered, refer to
Inflatable Restraint Steering Wheel Module Coil Centering
.
Steering Wheel Airbag Coil Replacement
© 2011 General Motors. All rights reserved.
Restraints
RESTRAINTS
0-8
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
