6. Position the quarter outer panel on the vehicle (1).
7. Verify the fit of the quarter outer panel.
8. Clamp the quarter outer panel into position.
9. Plug weld accordingly (1).
10. To create a solid weld with minimum heat distortion, make 25
mm (1
in)stitch welds along the seam with 25
mm (1
in)gaps
between them. Then go back and complete the stitch weld.
11. Pre-flanging the flange with BO-6396 pliers and BO-6392 tool kit .
12. Finish closing the wheelhouse flanging.
13. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and
Repair
.
14. Paint the repaired area. Refer to
Basecoat/Clearcoat Paint Systems
.
15. Install all related panels and components.
16. Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
17. Enable the SIR system. Refer to
SIR Disabling and Enabling
.
© 2011 General Motors. All rights reserved.
Collision Repair
BODY REPAIR
0-3
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
