Quarter Inner Panel Sectioning (5HB)
Removal Procedure
Warning:
Refer to
Approved Equipment for Collision Repair Warning
.
Warning:
Refer to
Collision Sectioning Warning
.
Warning:
Refer to
Glass and Sheet Metal Handling Warning
.
1. Disable the SIR System. Refer to
SIR Disabling and Enabling
.
2. Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
3. Remove all related panels and components.
4. Visually inspect the damage. Repair as much of the damage as possible.
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to
Anti-Corrosion Treatment and
Repair
.
6. Create cut lines on the body lock pillar inner reinforcement
(1).
Note: Do not damage any inner panels or reinforcements.
7. Cut the panel where sectioning is to be performed (1).
8. Locate and mark all the necessary factory welds of the body lock pillar inner reinforcement.
Collision Repair
BODY REPAIR
0-3
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
