Body Hinge Pillar Lower Reinforcement Replacement
Removal Procedure
Warning:
Refer to
Approved Equipment for Collision Repair Warning
.
1. Disable the SIR system. Refer to
SIR Disabling and Enabling
.
2. Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
3. Remove all related panels and components.
4. Repair as much of the damage as possible. Refer to
Dimensions - Body
.
5. Remove the sealers and anti-corrosion materials from the repair area. Refer to
Anti-Corrosion Treatment and Repair
.
6. Locate and mark all the necessary factory welds of the front hinge pillar body.
7. Drill all factory welds (1). Note the number and location of welds for installation of the service assembly.
8. Remove the damaged front hinge pillar body reinforcement (1).
Installation Procedure
1. Prepare all mating surfaces as necessary.
2. Align the front hinge pillar body reinforcement.
© 2011 General Motors. All rights reserved.
Collision Repair
BODY REPAIR
0-3
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
