Chevrolet 2010 Colorado Owner'S Manual Download Page 369

Page: 369 / 450

Rear Position

If the flat tire is on the rear, position the jack under
the rear axle and get as close as possible to the
shock absorber.

5. Make sure the jack head is positioned so that the

rear axle is resting securely between the grooves
that are on the jack head.

6. Turn the wheel wrench clockwise to raise the

vehicle. Raise the vehicle far enough off the
ground so there is enough room for the spare tire
to fit under the wheel well.

7. Remove all the wheel

nuts and the flat tire.

6-89

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands