Chevrolet 2010 Colorado Owner'S Manual Download Page 163

Page: 163 / 450

Instrument Panel Overview

Hazard Warning Flashers

(Hazard Warning Flasher):

Press this button

located on the instrument panel, to make the front and
rear turn signal lamps flash on and off. This warns
others that you are having trouble.

Press

again to turn the flashers off.

The turn signals do not work while the hazard warning
flashers are on.

Horn

To sound the horn, press the horn symbol on the
steering wheel pad.

Tilt Wheel

To adjust the steering wheel:

1. Hold the steering wheel and pull the lever

toward you.

2. Move the steering wheel up or down into a

comfortable position.

3. Release the lever to lock the wheel in place.

Do not adjust the steering wheel while driving.

4-3

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands