Chevrolet 2010 Colorado Owner'S Manual Download Page 364

Page: 364 / 450

1. Assemble the wheel wrench (D), the jack handle

extensions (A) and the jack handle (C) as shown.

2. Insert the chiseled end of the jack handle (C) at a

slight angle through the hole in the rear bumper
and into the funnel-shaped guide.

3. Turn the wheel wrench (D) counterclockwise to

lower the spare tire to the ground. Continue to turn
the wheel wrench until the spare tire can be pulled
out from under the vehicle.

If the spare tire does not lower to the ground, the
secondary latch is engaged causing the tire not to
lower. See

Secondary Latch System on page 6

‑

6-84

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands