Chevrolet 2010 Colorado Owner'S Manual Download Page 164

Page: 164 / 450

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:

Turn and Lane Change Signals

Headlamp High/Low

‐

Beam Changer

Windshield Wipers

Windshield Washer

Cruise Control

Flash-to-Pass.

Information for these features is on the pages following.

Turn and Lane-Change Signals

An arrow on the
instrument panel cluster
flashes in the direction of
the turn or lane change.

Move the lever all the way up or down to signal a turn.

Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane change
is complete.

The lever returns to its starting position when it is
released.

If after signaling a turn or a lane change the arrows
flash rapidly or do not come on, a signal bulb may be
burned out.

Have the bulbs replaced. If the bulb is not burned out,
check the fuse. For bulb replacement, see

Taillamps,

Turn Signal, Stoplamps and Back-up Lamps on
page 6

‑

. For a blown fuse or circuit breaker, see

Fuses and Circuit Breakers on page 6

‑

112

4-4

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands