Chevrolet 2010 Colorado Owner'S Manual Download Page 404

Page: 404 / 450

When the Change Oil message displays, certain
services, checks, and inspections are required. The
services described for Maintenance

should be

performed at every engine oil change. The services
described for Maintenance

should be

performed when:

Maintenance

was performed the last time the

engine oil was changed.

It has been 10 months or more since the Change
Oil message has displayed or since the last
service.

Maintenance

Change engine oil and filter. See

Engine Oil on

page 6

‑

An Emission Control Service.

Engine coolant level check. See

Engine Coolant

on page 6

‑

Windshield washer fluid level check. See

Windshield Washer Fluid on page 6

‑

Tire inflation check. See

Inflation - Tire Pressure

on page 6

‑

Tire wear inspection. See

Tire Inspection and

Rotation on page 6

‑

Rotate tires. See

Tire Inspection and Rotation on

page 6

‑

Fluids visual leak check (or every 12 months,
whichever occurs first). A leak in any system must
be repaired and the fluid level checked.

Engine air cleaner filter inspection (vehicles driven
in dusty conditions only). See

Engine Air Cleaner/

Filter on page 6

‑

Brake system inspection (or every 12 months,
whichever occurs first).

Maintenance

Perform all services described in Maintenance

Steering and suspension inspection. Visual
inspection for damaged, loose, or missing parts or
signs of wear.

Engine cooling system inspection. Visual
inspection of hoses, pipes, fittings, and clamps and
replacement, if needed.

Windshield wiper blade inspection for wear,
cracking, or contamination and windshield and
wiper blade cleaning, if contaminated. See

Windshield and Wiper Blades on page 6

‑

108

Worn or damaged wiper blade replacement.
See

Windshield Wiper Blade Replacement on

page 6

‑

7-4

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands