Chevrolet 2010 Colorado Owner'S Manual Download Page 380

Page: 380 / 450

To store the jack and wheel blocks:

Regular/Extended Cab

A. Jack

B. Wheel Blocks

C. Wing Nut

1. Install the wheel blocks (B) first.

2. Reinstall the wing nut (C) by turning it clockwise to

secure the wheel blocks to the vehicle.

3. Lower the jack (A) all the way and insert the jack

into the bracket.

4. Raise the jack by turning the handle clockwise to

secure the jack within the bracket.

5. Put the cover in position and insert and tighten the

wing nut to secure it.

6-100

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands