Chevrolet 2010 Colorado, Owner'S Manual

Page: 351 / 450

Reset the Tire Pressure Monitor System. See Tire
Pressure Monitor Operation on page 6 ‑ 66 .
Make certain that all wheel nuts are properly
tightened. See
“ Wheel Nut Torque ” under
Capacities and Specifications on page 6 ‑ 119 .
{
WARNING:
Rust or dirt on a wheel, or on the parts to
which it is fastened, can make wheel nuts
become loose after time. The wheel could
come off and cause an accident. When you
change a wheel, remove any rust or dirt from
places where the wheel attaches to the
vehicle. In an emergency, you can use a
cloth or a paper towel to do this; but be sure
to use a scraper or wire brush later,
if needed, to get all the rust or dirt off. See
Changing a Flat Tire on page 6 ‑ 80 .
Make sure the spare tire is stored securely. Push,
pull, and then try to rotate or turn the tire. If it
moves, tighten the cable. See
Storing a Flat or
Spare Tire and Tools on page 6 ‑ 96 .
When It Is Time for New Tires
Various factors, such as maintenance, temperatures,
driving speeds, vehicle loading, and road conditions,
influence when you need new tires.
One way to tell when it is
time for new tires is to
check the treadwear
indicators, which appear
when your tires have only
1/16 inch (1.6 mm) or less
of tread remaining. Some
commercial truck tires
may not have treadwear
indicators.
6-71