Chevrolet 2010 Colorado Owner'S Manual Download Page 262 | Manualshive

Page: 262 / 450

background image

Dinghy Towing

Two-Wheel Drive Vehicles

Notice:

If the vehicle is towed with all four wheels

on the ground, the drivetrain components could be
damaged. The repairs would not be covered by the
vehicle warranty. Do not tow the vehicle with all
four wheels on the ground.

Two-wheel-drive vehicles should not be towed with
all four wheels on the ground. Two-wheel-drive
transmissions have no provisions for internal lubrication
while being towed.

Four-Wheel Drive Vehicles

Use the following procedure to dinghy tow a
four-wheel-drive vehicle:

1. Position the vehicle being towed behind the tow

vehicle.

2. Put an automatic transmission in P (Park) or a

manual transmission in 1 (First).

5-40

«
...
260
261
262
263
264
...
»

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Colorado

Brand: Kargo Master Pages: 5

Brand: Toyota Pages: 529

Brand: Laser Pages: 8

Brand: RAM Pages: 292

Brand: RAM Pages: 116

NPL-TV 7874 DIGITAL

Brand: Napoli Pages: 20

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: FORM FIT Pages: 2

Brand: WABCO Pages: 32

Brand: BMW Pages: 55

Brand: Whispbar Pages: 15

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: Yutrax Pages: 8

Brand: Mitsubishi MOTORS Pages: 416

Brand: Yakima Pages: 12

PRIME DESIGN VCR-TC11B

Brand: Safe Fleet Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands