Chevrolet 2010 Colorado Owner'S Manual Download Page 362

Page: 362 / 450

Put the tools to the side while you access the jack and
wheel blocks.

Regular/Extended Cab

For regular and extended cab vehicles, the jack and
wheel blocks are located under the cover at the center
of the vehicle behind the front seats.

1. Turn the wing nut on the cover counterclockwise to

remove it.

A. Jack

B. Wheel Blocks

C. Wing Nut

D. Jack Knob

2. Lower the jack (A) by turning the jack knob (D)

counterclockwise to release the jack from the
bracket.

3. Turn the wing nut (C) holding the wheel blocks (B)

to the back of the vehicle counterclockwise to
release the wheel blocks.

6-82

Summary of Contents for 2010 Colorado



































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands

Chevrolet 2010 Colorado, Owner'S Manual

Search results

Summary of Contents for 2010 Colorado

Reviews:

Related manuals for 2010 Colorado

Brands by name

Popular brands