Chevrolet 2009 HHR Owner'S Manual Download Page 327

Page: 327 / 450

Center High-Mounted
Stoplamp (CHMSL)

To replace the center high-mounted stoplamp bulb:

1. Open the liftgate. See Liftgate on page 2-12.

2. Remove the center trim located near the top of the

liftgate.

3. Turn the bulb socket counterclockwise and pull it

straight out of the lamps assembly.

4. Pull the old bulb straight out of the bulb socket.

5. Push the new bulb straight into the bulb socket until

it clicks.

6. Push the bulb socket straight into the lamp

assembly and turn it clockwise to lock it into place.

7. Reinstall the center trim.

5-49

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands