Chevrolet 2009 HHR Owner'S Manual Download Page 375

Page: 375 / 450

9. Attach the strap to the

cargo tie-downs in the
rear of the vehicle.

10. Slide the buckle to tighten the tie-down strap.

Storing the Compact Spare Tire
and Tools

Use the diagram as a guide for storing the compact
spare tire once you are done using it.

A. Retainer
B. Cover
C. Spare Tire
D. Wing Nut

E. Jack and Wheel

Wrench

F. Strap
G. Bolt

1. Open the liftgate. See Liftgate on page 2-12 for

more information.

2. Install the strap (F) on the floor of the spare tire

compartment.

3. Place the jack and wheel wrench (E) over the

bolt (G), making sure the strap is securely
stored, under the jack and wheel wrench.

5-97

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Chevrolet 2009 HHR, Owner'S Manual, Page: 375 / 450

Search results

Summary of Contents for 2009 HHR

Reviews: