Chevrolet 2009 HHR Owner'S Manual Download Page 328

Page: 328 / 450

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps

A. Stoplamp/Taillamp/Turn Signal Lamp

B. Back-up Lamp

To replace one of these bulbs:

1. Open the liftgate. See Liftgate on page 2-12.

2. Remove the cover in the rear cargo area of the

vehicle to access the bulbs.

3. Turn the bulb socket counterclockwise and pull it

straight out of the lamp assembly.

4. Pull the bulb straight out of the socket.
5. Install a new bulb. When installing the bulb socket

into the assembly, line up the tabs with the slots in
the bulb assembly.

5-50

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands