Chevrolet 2009 HHR Owner'S Manual Download Page 147

Page: 147 / 450

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:

: Turn and Lane-Change Signals

5 3

: Headlamp High/Low-Beam Changer

: Exterior Lamp Control

Flash-to-Pass.

Information for these features is on the pages following.

Turn and Lane-Change Signals

An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.

Move the lever all the way up or down to signal a turn.

Raise or lower the lever until the arrow starts to flash
to signal a lane change. Hold it there until the lane
change is complete.

The lever returns to its starting position when it is
released.

If after signaling a turn or a lane change the arrows
flash rapidly or does not come on, a signal bulb may be
burned out.

Have the bulbs replaced. If the bulb is not burned out,
check the fuse. See Fuses and Circuit Breakers on
page 5-109.

3-7

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands