Chevrolet 2009 HHR Owner'S Manual Download Page 146

Page: 146 / 450

Hazard Warning Flashers

(Hazard Warning Flasher): Press this button

located on the instrument panel, to make the front and
rear turn signal lamps flash on and off. This warns
others that you are having trouble.

Press

again to turn the flashers off.

Horn

To sound the horn, press the horn symbols located on
the steering wheel.

Tilt Wheel

A tilt wheel lets the steering wheel be adjusted before
driving.

The tilt lever is located on the left side of the steering
column.

To tilt the wheel, pull the lever down. Then, move the
wheel to a comfortable position and raise the lever
to lock the wheel in place.

Do not adjust the steering wheel while driving.

3-6

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands