Chevrolet 2009 HHR Owner'S Manual Download Page 371

Page: 371 / 450

7. Remove any rust or dirt

from the wheel bolts,
mounting surfaces, and
wheel.

8. Place the tire on the wheel mounting surface.

9. Reinstall the wheel nuts with the rounded end of

the nuts toward the wheel. Tighten each by hand
until the wheel is held against the hub.

{

CAUTION:

Never use oil or grease on bolts or nuts because
the nuts might come loose. The vehicle’s wheel
could fall off, causing a crash.

10. Lower the vehicle by turning the jack handle

counterclockwise. Lower the jack completely.

5-93

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands