Chevrolet 2009 HHR Owner'S Manual Download Page 218 | Manualshive

Page: 218 / 450

background image

Connecting a USB Storage Device
or iPod

®

The USB Port can be used to control an iPod or a USB
storage device.

To connect a USB storage device, connect the device
to the USB port located on the front of the radio.

To connect an iPod, connect one end of the USB cable
that came with the iPod to the iPod’s dock connector and
connect the other end to the USB port located on the front
of the radio. If the vehicle is on and the USB connection
works, “OK to disconnect” and a GM logo may appear
on the iPod and iPod appears on the radio’s display.
The iPod music appears on the radio’s display and
begins playing.

The iPod charges while it is connected to the vehicle if
the vehicle is in the ACC/ACCESSORY or ON/RUN
position. When the vehicle is turned off, the iPod
automatically powers off and will not charge or draw
power from the vehicle’s battery.

If you have an older iPod model that is not supported, it
can still be used by connecting it to the Auxiliary Input
Jack using a standard 3.5 mm (1/8 inch) stereo cable.
See “Using the Auxiliary Input Jack” earlier for more
information.

Using the Radio to Control a USB
Storage Device or iPod

The radio can control a USB storage device or an iPod
using the radio buttons and knobs and display song
information on the radio’s display.

f

(Tune): Turn to select files.

©

SEEK: Press to go to the start of the track, if more

than ten seconds have played. Press and hold or
press multiple times to continue moving backward
through tracks.

¨

SEEK: Press to go to the next track. Press and

hold or press multiple times to continue moving forward
through tracks.

s

REV (Reverse): Press and hold to reverse playback

quickly. Sound is heard at a reduced volume. Release

s

REV to resume playing. The elapsed time of the file

displays.

\

FWD (Fast Forward): Press and hold to advance

playback quickly. Sound is heard at a reduced volume.
Release

\

FWD to resume playing. The elapsed

time of the file displays.

4

(Information): Press to display additional information

about the selected track.

3-78

«
...
216
217
218
219
220
...
»

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2009 HHR

Brand: Davis Instruments Pages: 16

Brand: Conrad Pages: 26

2003 Thunderbird

Brand: Ford Pages: 200

Brand: Victory 4x4 Pages: 13

Brand: Whispbar Pages: 15

1973 Convertible

Brand: Volkswagen Pages: 80

Vantage 12 Series

Brand: Ecco Pages: 5

Brand: ULTIMATE SPEED Pages: 21

Brand: Hummer Pages: 502

Brand: Road Ranger Pages: 22

Brand: Opel Pages: 32

Brand: Sanitas Pages: 36

FOLDING TOP 1971

Brand: Fisher Body Pages: 37

Brand: Manik Pages: 2

Brand: Vangear Pages: 5

Brand: Safe Fleet Pages: 20

QuadraTop 11051.0415

Brand: Quadratec Pages: 8

Brand: Packard Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands