Chevrolet 2009 HHR Owner'S Manual Download Page 326

Page: 326 / 450

To replace the headlamp, turn signal, or parking
lamp bulb:

1. Turn the wheel to access the wheel well.

2. Remove the fasteners located on the wheel liner.

To access the headlamp and the turn signal/parking
lamp bulbs.

3. Reach in behind the wheel well liner and locate the

bulb to be changed.

4. Turn the bulb socket counterclockwise and pull it

straight out of the lamp assembly.

5. Pull the old bulb straight out of the bulb socket.

6. Push the new bulb straight into the bulb socket until

it clicks.

7. Push the bulb socket straight into the lamp

assembly and turn it clockwise to lock it into place.

8. Reinstall the wheel well liner using fasteners.

5-48

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands