Chevrolet 2009 HHR Owner'S Manual Download Page 231

Page: 231 / 450

Three-Way Calling

Three-Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.

1. While on a call press

. The system responds

with “Ready” followed by a tone.

2. Say “Three-way call”. The system responds with

“Three-way call, please say dial or call”.

3. Use the dial or call command to dial the number of

the third party to be called.

4. Once the call is connected, press

to link all

the callers together.

Ending a Call

Press

to end a call.

Muting a Call

During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.

To Mute a call

1. Press

. The system responds with “Ready”

followed by a tone.

2. Say “Mute Call”. The system responds with “Call

muted”.

To Cancel Mute

1. Press

. The system responds with “Ready”

followed by a tone.

2. After the tone, say “Mute Call”. The system

responds with “Resuming call”.

Transferring a Call

Audio can be transferred between the in-vehicle
Bluetooth system and the cell phone.

To Transfer Audio to the Cell Phone

During a call with the audio in the vehicle:

1. Press

. The system responds with “Ready”

followed by a tone.

2. Say “Transfer Call.” The system responds with

“Transferring call” and the audio will switch from
the vehicle to the cell phone.

3-91

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands

Chevrolet 2009 HHR, Owner'S Manual

Search results

Summary of Contents for 2009 HHR

Reviews:

Related manuals for 2009 HHR

Brands by name

Popular brands