Chevrolet 2009 HHR Owner'S Manual Download Page 126

Page: 126 / 450

1. When the approaching vehicle is a long distance

away, the image in the main mirror is small and
near the inboard edge of the mirror.

2. As the vehicle gets closer, the image in the main

mirror gets larger and moves outboard.

3. As the vehicle enters the blind zone, the image

transitions from the main mirror to the blind spot
mirror.

4. When the vehicle is completely in the blind zone,

the image will only appear in the blind spot mirror
and is entirely off the main mirror.

2-42

Summary of Contents for 2009 HHR



































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 HHR

Reviews:

Chevrolet 2009 HHR, Owner'S Manual, Page: 126 / 450

Search results

Summary of Contents for 2009 HHR

Reviews: