Chevrolet 2008 Tahoe Owner'S Manual Download Page 71 | Manualshive

Page: 71 / 542

Chevrolet 2008 Tahoe Owner'S Manual Download Page 71

Securing a Child Restraint Designed for
the LATCH System

{

CAUTION:

If a LATCH-type child restraint is not attached to
anchors, the restraint will not be able to protect
the child correctly. In a crash, the child could be
seriously injured or killed. Make sure that a
LATCH-type child restraint is properly installed
using the anchors, or use the vehicle’s safety
belts to secure the restraint, following the
instructions that came with that restraint, and
also the instructions in this manual.

{

CAUTION:

Each top tether anchor and lower anchor in the
vehicle is designed to hold only one child
restraint. Attaching more than one child
restraint to a single anchor could cause the
anchor or attachment to come loose or even
break during a crash. A child or others could be
injured if this happens. To help prevent injury to
people and damage to your vehicle, attach only
one child restraint per anchor.

1-67

«
...
69
70
71
72
73
...
»

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Reviews:

No comments