Chevrolet 2008 Tahoe Owner'S Manual Download Page 468

Page: 468 / 542

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise
until you hear two clicks or feel it skip twice. You
cannot overtighten the cable.

7. Make sure the tire is stored securely. Push, pull (A),

and then try to turn (B) the tire. If the tire moves,
use the wheel wrench to tighten the cable.

8. Reinstall the spare tire lock.

9. Reinstall the hoist shaft access cover.

To store the tools, do the following.

A. Wheel Blocks
B. Tool Bag with

Jack Tools

C. Retaining Bracket
D. Wing Nut Retaining

Tool Bag

E. Jack
F. Wing Nut Retaining

Wheel Blocks

G. Wing Nut on Jack

5-104

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 468 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: