Chevrolet 2008 Tahoe Owner'S Manual Download Page 453

Page: 453 / 542

To access the spare tire, refer to the following graphics
and instructions:

A. Hoist Assembly
B. Hoist Shaft
C. Hoist Shaft Access

Cover/Hole

D. Jack Handle

Extensions

E. Wheel Wrench
F. Hoist Cable

G. Tire/Wheel Retainer
H. Spare Tire (Valve

Stem Pointed Down)

I. Hoist Shaft Access

Hole

J. Hoist End of

Extension Tool

K. Spare Tire Lock

1. Open the hoist shaft access door (C) on the

bumper to access the spare tire lock (K).

2. To remove the spare tire lock, insert the ignition

key, turn it clockwise and then pull it straight out.

3. Assemble the two jack handle extensions (D) and

wheel wrench (E) as shown.

5-89

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 453 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: