Chevrolet 2008 Tahoe Owner'S Manual Download Page 227

Page: 227 / 542

Fog Lamp Light

The fog lamp light will
come on when the fog
lamps are in use.

The light will go out when the fog lamps are turned off.
See Fog Lamps on page 3-18 for more information.

Cruise Control Light

This light comes on
whenever you set the
cruise control.

The light goes out when the cruise control is turned off.
See Cruise Control on page 3-12 for more information.

Highbeam On Light

This light comes on when
the high-beam headlamps
are in use.

See Headlamp High/Low-Beam Changer on page 3-9
for more information.

Tow/Haul Mode Light

This light comes on when
the Tow/Haul mode has
been activated.

For more information, see Tow/Haul Mode on page 2-37.

3-53

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 227 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: