Chevrolet 2008 Tahoe Owner'S Manual Download Page 464

Page: 464 / 542

8. Attach the jack handle, extension, and wheel

wrench to the jack and place it (with the wheel
blocks) under the vehicle toward the front of the
rear bumper.

9. Position the center lift point of the jack under the

center of the spare tire.

10. Turn the wrench clockwise to raise the jack until it

lifts the end fitting.

11. Continue raising the jack until the spare tire stops

moving upward and is held firmly in place.
The secondary latch has released and the spare
tire is balancing on the jack.

5-100

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 464 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: