Chevrolet 2008 Tahoe Owner'S Manual Download Page 463

Page: 463 / 542

3. Loosen the cable by turning the wrench

counterclockwise three or four turns.

4. Repeat this procedure at least two times. If the

spare tire lowers to the ground, continue with
Step 5 of Removing the Spare Tire and Tools on
page 5-87.

5. If the spare does not lower, turn the wrench

counterclockwise until approximately 6 inches
(15 cm) of cable is exposed.

6. Stand the wheel blocks on their shortest ends, with

the backs facing each other.

7. Place the bottom edge

of the jack (A) on the
wheel blocks (B),
separating them so that
the jack is balanced
securely.

5-99

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 463 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: