Chevrolet 2008 Tahoe Owner'S Manual Download Page 145

Page: 145 / 542

Engine Exhaust

{

CAUTION:

Engine exhaust can kill. It contains the gas
carbon monoxide (CO), which you cannot
see or smell. It can cause unconsciousness
and death.

You might have exhaust coming in if:

•

The exhaust system sounds strange or
different.

•

Your vehicle gets rusty underneath.

•

Your vehicle was damaged in a collision.

•

Your vehicle was damaged when driving
over high points on the road or over
road debris.

CAUTION:

(Continued)

CAUTION:

(Continued)

•

Repairs were not done correctly.

•

Your vehicle or the exhaust system has
been modified improperly.

If you ever suspect exhaust is coming into
your vehicle:

•

Drive it only with all the windows down to
blow out any CO; and

•

Have your vehicle fixed immediately.

2-47

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 145 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: