Chevrolet 2008 Tahoe Owner'S Manual Download Page 484

Page: 484 / 542

Underhood Fuse Block

The underhood fuse block is located in the engine
compartment, on the driver side of the vehicle. Lift the
cover for access to the fuse/relay block.

Notice: Spilling liquid on any electrical components
on your vehicle may damage it. Always keep the
covers on any electrical component.

To remove fuses, hold the end of the fuse between your
thumb and index finger and pull straight out.

Fuses

Usage

Right Trailer Stop/Turn Lamp

Electronic Stability Suspension
Control, Automatic Level Control
Exhaust

Left Trailer Stop/Turn Lamp

Engine Controls

Engine Control Module, Throttle
Control

5-120

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Tahoe

Reviews:

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 484 / 542

Search results

Summary of Contents for 2008 Tahoe

Reviews: