Chevrolet 2008 Tahoe Owner'S Manual Download Page 45 | Manualshive

Page: 45 / 542

Chevrolet 2008 Tahoe Owner'S Manual Download Page 45

Q:

What is wrong with this?

A:

The belt is behind the body.

{

CAUTION:

You can be seriously injured by not wearing
the lap-shoulder belt properly. In a crash, you
would not be restrained by the shoulder belt.
Your body could move too far forward
increasing the chance of head and neck injury.
You might also slide under the lap belt.
The belt force would then be applied right on
the abdomen. That could cause serious or fatal
injuries. The shoulder belt should go over the
shoulder and across the chest.

1-41

«
...
43
44
45
46
47
...
»

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Reviews:

No comments