Chevrolet 2008 Tahoe, Owner'S Manual, Page: 104 / 542

Q
(Lock): Press
Q
to lock all the doors. If enabled
through the Driver Information Center (DIC), the parking
lamps will flash once to indicate locking has occurred.
If enabled through the DIC, the horn will chirp when the
lock button is pressed again within five seconds of
the previous press of the lock button. See DIC Vehicle
Customization (With DIC Buttons) on page 3-73 for
additional information. Pressing
Q
will arm the content
theft-deterrent system. See Content Theft-Deterrent
on page 2-22.
"
(Unlock): Press
"
to unlock the driver’s door. If
"
is
pressed again within three seconds, all remaining
doors will unlock. If it is dark enough outside, the interior
lamps will come on and stay on for 20 seconds or
until the ignition is turned on. If enabled through the DIC,
the turn signal lamps will flash twice to indicate
unlocking has occurred. See DIC Vehicle Customization
(With DIC Buttons) on page 3-73. If enabled through
the DIC, the exterior lights will turn on briefly if it is dark
enough outside. See ‘‘Approach Lighting’’ under DIC
Vehicle Customization (With DIC Buttons) on page 3-73.
Pressing
"
on the RKE transmitter will disarm the
content theft-deterrent system. See Content
Theft-Deterrent on page 2-22.
m
(Liftglass): For vehicles with a liftglass, press and
hold
m
to open the liftglass.
&
(Power Liftgate): For vehicles with a power
liftgate, press and hold
&
to open and close the
liftgate. The taillamps will flash and a chime will sound
to indicate when the liftgate is opening and closing.
L
(Vehicle Locator/Panic Alarm): Press and release
L
to locate your vehicle. The turn signal lamps will
flash and the horn will sound three times.
Press and hold
L
for more than two seconds to
activate the panic alarm. The turn signal lamps will flash
and the horn will sound repeatedly for 30 seconds.
The alarm will turn off when the ignition is moved
to ON/RUN or
L
is pressed again. The ignition must
be in LOCK/OFF for the panic alarm to work.
2-6