manualshive.com logo in svg

Chevrolet 2008 Tahoe, Owner'S Manual, Page: 33 / 542

Share
Download
Chevrolet 2008 Tahoe Owner'S Manual Download Page 33

4. Push and pull on the seat to make sure it is locked

into place. The seatback cannot be raised to the
upright position unless the seat is secured to
the floor.

5. Pull up on the seatback until it locks into the upright

position.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.

6. Push and pull on the seatback to make sure it

is locked.

{

CAUTION:

A safety belt that is improperly routed, not
properly attached, or twisted will not provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.

7. Make sure the safety belts are returned to the

original position over the seatbacks.

1-29

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Reviews:

No comments