Chevrolet 2008 Tahoe Owner'S Manual Download Page 23 | Manualshive

Page: 23 / 542

Chevrolet 2008 Tahoe Owner'S Manual Download Page 23

Reclining Seatbacks

To recline the seatback, do the following:

1. Lift the lever located on the outboard side of the seat.

2. Move the seatback to the desired position, then

release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it is

locked.

To return the seatback to an upright position, do the
following:

1. Lift the lever fully without applying pressure to the

seatback and the seatback will return to the upright
position.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.

2. Push and pull on the seatback to make sure it is

locked.

1-19

«
...
21
22
23
24
25
...
»

Summary of Contents for 2008 Tahoe































































































































































































































































































































































































































































































































































Reviews:

No comments