Chevrolet 2002 Venture Page 351 Owner'S Manual Download

Page: 351 / 486

5-18

Housing

Bypass Tube

3. After the engine cools, open the coolant air

bleed valves.

There are two bleed valves. One is located on the
thermostat housing. The other is located on the
thermostat bypass tube.

4. Fill the radiator with the proper DEX

COOL

coolant mixture, up to the base of the filler neck. See
“Engine Coolant” in the Index for more information
about the proper coolant mixture.

If you see a stream of coolant coming from an air
bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.

5. Rinse or wipe any spilled coolant from the engine

and the compartment.

Summary of Contents for 2002 Venture






































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Venture

Reviews:

Related manuals for 2002 Venture

Brands by name

Popular brands

Chevrolet 2002 Venture, Owner'S Manual

Search results

Summary of Contents for 2002 Venture

Reviews:

Related manuals for 2002 Venture

Brands by name

Popular brands